

Idem 174410: HLM-CBA 1NC 1NO with Plastic Roller M20 SNAP | Safety Switch Accessories
“Compact, die-cast belt alignment switch with 22mm diameter and 70mm roller.”
Request a quote
Attribute | Value |
---|---|
Approvals: | cULus |
Technology: | Mini Belt Alignment Switch |
Housing Material: | Painted Die-Cast Metal |
UL Info: | Type 1 Enclosures. Use 16 – 12AWG copper conductors, rated 75ºC minimum. Intended for same polarity use. Electrical Rating A300 240V.ac 3A. (6,000 cycles) 240V. 10A. carry only. Wire range 16AWG 12AWG Copper Torque 7lb/in (0.8Nm) Earth bonding terminal inside enclosure if required. |
Roller Material: | 316 Grade Stainless Steel or Polyester |
Thermal Current (Ith): | 10A |
Enclosure Protection: | IP67 |
Operating Temperature: | -25 … +80 °C |
Vibration: | IEC 68-2-6, 10-55Hz 0.35mm |
Fixing: | M5 Bolts (Torque 2.0Nm) |
Utilization Category: | AC15 A300 240V. 3A |
Min Current: | 5V, 5mA, DC |
Rated Impulse Withstand Volt: | 2500VAC |
Mechanical Life Expectancy: | 500,000 Cycles |
Typical operating parameters: | 0.4Nm Torque 15-30 degrees contact changeover |
Conductor Size: | 1.5 sq.mm |
Product Number | Variant Description |
---|---|
174412 | HLM-CBA 1NC 1NO with Plastic Roller QC-M23 SNAP |
174411 | HLM-CBA 1NC 1NO with Plastic Roller 1/2″NPT SNAP |
174461 | HLM-CBA 1NC 1NO with SS Roller 1/2″NPT SNAP |
174460 | HLM-CBA 1NC 1NO with SS Roller M20 SNAP |
174462 | HLM-CBA 1NC 1NO with SS Roller QC-M23 SNAP |