| Rated insulation voltage Ui: |
75 V |
| Rated impulse voltage Uimp: |
0.5 kV |
| Connection Type: |
2 x plug connectors M12, 8-pin |
| Degree of protection: |
IP65 |
| Ambient temperature: |
-20 … +45 °C |
| Item designation: |
ECB-A-2K-A1-160397 |
| Gross weight: |
3,495kg |
| EMC protection requirements: |
EN 60947-5-3 |
| Safety Class: |
III |
| Degree of contamination (external, according to EN 60947-1): |
3 |
| Rated Conditional Short-circuit Current: |
100 A |
| Ready Delay: |
10 … 12 s(After the operating voltage is switched on, the relay outputs are switched off and the monitoring outputs are set to LOW level during the ready delay. For visual indication of the delay, the green STATE LED flashes at a frequency of approx. 15 Hz.) |
| Shock And Vibration Resistance: |
Acc. to EN IEC 60947-5-3 |
| Notices For UL Approval: |
Operation only with UL Class 2 power supply or equivalent measures |
| Performance Level: |
PL e(This value is dependent on the number of switching cycles and the switching current.) |
| Category: |
4(This value is dependent on the number of switching cycles and the switching current.) |
| Mission time: |
20 y(This value is dependent on the number of switching cycles and the switching current.) |
| Dimensions: |
160 x 160 x 150 |
| Diagnostic Coverage (DC): |
99 % |
| Number of safety inputs: |
2 semiconductor outputs of safety switch CTP-LBI-AP are connected in series with one relay contact each (relay with internally monitored contacts) |
