Euchner 110370E | CES-AH-C03-AE-LS-110370 : Non-Contact Safety Switch
$1,116.67
Explore the Euchner 110370E | CES-AH-C03-AE-LS-110370 : Non-Contact Safety Switch. Now sold at Venus Automation. Request a quote now!
| Attribute | Value |
|---|---|
| Product Code: | 110370E |
| LED Display: | 2 STATE (green) and DIA (red) |
| Dimensions: | 40 x 40 x 168 |
| Connection Type: | Connecting cable PUR, 0.5 m, with plug connector AMP Super Seal, 1×3-pin / 1×4-pin |
| Installation Orientation: | any |
| Storage temperature: | -25 … 70 °C |
| Degree of protection: | IP65/IP67 |
| Ambient temperature: | -25 … 70 °C |
| Order Number: | 110370 |
| Item designation: | CES-AH-C03-AE-LS-110370 |
| Gross weight: | 0,7kg |
| Customs tariff number: | 85365019000 |
| ECLASS: | 27-27-24-03 Safety-related transponder switch |
| Secured Switch-off Distance Sar: | max. 75 mm |
| Rated insulation voltage Ui: | 75 V |
| Rated impulse voltage Uimp: | 1.5 kV |
| EMC protection requirements: | as per DIN EN 13309 |
| Safety Class: | III |
| Degree of contamination (external, according to EN 60947-1): | 3 |
| Switching frequency: | max. 1 Hz |
| Shock And Vibration Resistance: | Acc. to EN IEC 60947-5-3 |
| Switching current: | 30 … 4000 mA |
| Output Type: | Semiconductor output, p-switching, short circuit-proof |
| Switching hysteresis: | 3 mm(The values apply to surface mounting of the actuator on steel.) |
| Off-state Current Ir: | max. 0.5 mA |
| Test Pulse Duration: | max. 6 ms(With series connection, the value increases according to the number of switches used.) |
| Discrepancy time: | max. 50 ms |
| Risk time according to EN 60947-5-3: | max. 250 ms |
| Test Pulse Interval: | min. 10000 ms |
| Ready Delay: | max. 3 s(After the operating voltage is switched on, the semiconductor outputs are switched off during the ready delay.) |
| Static bending radius: | 10 x cable diameter |
| Rated Conditional Short-circuit Current: | 100 A |
| Dwell time: | min. 0.5 s(The dwell time of an actuator inside and outside the actuating range must be at least 0.5 s to ensure safe detection of internal faults in the evaluation unit (self-monitoring).) |
| Switch-on Distance: | 32 mm |
| Secured switching distance sao: | min. 27 mm(The values apply to surface mounting of the actuator on steel.) |
