Euchner 096960E | CES-A-UBA-01 : Evaluation Unit
The CES-A-UBA-01 is an evaluation unit designed for testing and analyzing various electronic systems and components.
| Attribute | Value |
|---|---|
| Rated insulation voltage Ui: | 63 V |
| Rated impulse voltage Uimp: | 1.5 kV |
| Connection Type: | plug-in screw terminals, coded |
| Degree of protection: | IP20 |
| Item designation: | CES-A-UBA-01 |
| Gross weight: | 0,247kg |
| ECLASS: | 27-27-24-03 Safety-related transponder switch |
| Mounting type: | TH 35 mounting rail (EN IEC 60715) |
| EMC protection requirements: | Acc. to EN IEC 60947-5-3 |
| Degree of contamination (external, according to EN 60947-1): | 2 |
| Output Type: | Relay contacts, floating |
| Output voltage: | 0.8 x UB … UB V DC |
| Rated Conditional Short-circuit Current: | 100 A |
| Ready Delay: | max. 3 s(After the operating voltage is switched on, the relay outputs are switched off and the door monitoring output is set to LOW level during the ready delay.) |
| Switching frequency: | max. 1 Hz(If the current load is>100 mA, a switching frequency of 0.1 Hz should not be exceeded as this will affect the mechanical life of the relay contacts.) |
| Notices For UL Approval: | Operation only with UL Class 2 power supply or equivalent measure. |
| Secured Switch-off Distance Sar: | max. 8.5 mm |
| Switching hysteresis: | 0.2 … 0.3 mm(for non-flush mounting; assembly of the read head in steel) |
| Output Current: | max. 20 mA |
| Number of safety contacts: | 2 Relay with internally monitored contacts(to ensure safety, both safety outputs (13/14 and 23/24) must always be evaluated) |
| Number of read heads: | 1 read head can be connected |
| Dwell time: | min. 0.5 s(The dwell time of an actuator inside and outside the actuating range must be at least 0.5 s to ensure safe detection of internal faults in the evaluation unit (self-monitoring).) |
| Product Number | Variant Description |
|---|---|
| CES-A-UBA-01 : Evaluation Unit | CES-A-UBA-01B : Evaluation Unit |
