| Rated insulation voltage Ui: |
75 V(Tested by the employers liability insurance association up to 75 V.) |
| Rated impulse voltage Uimp: |
1.5 kV |
| Connection Type: |
M12 plug connector, 8-pin; shield can be connected |
| Installation Orientation: |
any |
| Degree of protection: |
IP65/IP67 |
| Item designation: |
CES-A-C5H-01 |
| Gross weight: |
0,354kg |
| ECLASS: |
27-27-24-03 Safety-related transponder switch |
| Operating voltage DC: |
18 … 24 … 27 V DC regulated, residual ripple<5% |
| EMC protection requirements: |
Acc. to EN IEC 60947-5-3 |
| Current consumption: |
80 mA |
| Degree of contamination (external, according to EN 60947-1): |
3 |
| Output Type: |
Semiconductor outputs, p-switching, short circuit-proof, electrically decoupled(To ensure safety, both safety outputs (LA and LB) must be evaluated.) |
| Rated Conditional Short-circuit Current: |
max. 100 A |
| Ready Delay: |
max. 3 s(After the operating voltage is switched on, the semiconductor outputs are switched off and the monitoring outputs are set to LOW level during the ready delay.) |
| Switching frequency: |
max. 1 Hz |
| Notices For UL Approval: |
Operation only with UL Class 2 power supply or equivalent measures |
| Secured Switch-off Distance Sar: |
max. 40 mm |
| Switching hysteresis: |
2 … 3 mm(for non-flush mounting; assembly of the actuator) |
| Dwell time: |
min. 0.5 s(The dwell time of an actuator inside and outside the actuating range must be at least 0.5 s to ensure safe detection of internal faults in the evaluation unit (self-monitoring).) |
| Dimensions: |
according to EN 60947-5-2 (LxWxH) 131x40x40 |
