| Connection Cross Section: |
0.34 … 1.5 mm² |
| Rated insulation voltage Ui: |
250 V |
| Rated impulse voltage Uimp: |
2.5 kV |
| Short circuit protection according to IEC 60269-1: |
8A gG |
| thermal rated current Ith: |
8 A |
| Approach speed: |
0.01 … 40 m/min |
| Number NC contacts: |
2 |
| Number of switching elements: |
3 |
| Number of NO contacts: |
2 |
| Number of positively driven contacts: |
1 |
| Design: |
upright |
| Actuating element: |
Chisel plunger(Operating point accuracy ± 0.002. The reproducible operating point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2,000 operating cycles.) |
| Actuating force: |
min. 20 N |
| Installation Orientation: |
any |
| Mechanical Life: |
30 x 10? |
| Degree of protection: |
IP67 |
| Plunger spacing: |
16 mm |
| Ambient temperature: |
-5 … +80 °C |
| B10D: |
20 x 10? |
| Additional information: |
Mixed contact assembly(On upright multiple limit switches, it is necessary to start with the safety station/s from the flange side. If several safety stations are to be installed, these must be installed directly one after the other.) |
| Item designation: |
GSBF03D16-1508-M |
| Gross weight: |
0,717kg |
| ECLASS: |
27-27-06-02 Multi-position switch |
