| Rated insulation voltage Ui: |
63 V |
| Rated impulse voltage Uimp: |
1.5 kV |
| Connection Type: |
plug-in screw terminals, coded |
| Degree of protection: |
IP20 |
| Item designation: |
CES-A-ABA-01 |
| Gross weight: |
0,245kg |
| ECLASS: |
27-27-24-03 Safety-related transponder switch |
| Mounting type: |
TH 35 mounting rail (EN IEC 60715) |
| EMC protection requirements: |
Acc. to EN IEC 60947-5-3 |
| Degree of contamination (external, according to EN 60947-1): |
2 |
| Output Type: |
Relay contacts, floating |
| Output voltage: |
0.8 x UB … UB V DC |
| Rated Conditional Short-circuit Current: |
100 A |
| Ready Delay: |
max. 3 s(After the operating voltage is switched on, the relay outputs are switched off and the door monitoring output is set to LOW level during the ready delay.) |
| Switching frequency: |
max. 1 Hz(If the current load is>100 mA, a switching frequency of 0.1 Hz should not be exceeded as this will affect the mechanical life of the relay contacts.) |
| Notices For UL Approval: |
Operation only with UL Class 2 power supply or equivalent measure. |
| Secured Switch-off Distance Sar: |
max. 45 mm |
| Output Current: |
max. 20 mA |
| Number of safety contacts: |
2 Relay with internally monitored contacts(to ensure safety, both safety outputs (13/14 and 23/24) must always be evaluated) |
| Number of read heads: |
1 read head can be connected |
| Dwell time: |
min. 0.5 s(The dwell time of an actuator inside and outside the actuating range must be at least 0.5 s to ensure safe detection of internal faults in the evaluation unit (self-monitoring).) |
