DOLD GI 9014 | Motor Soft Starter
Technical Specifications
| Model | Product Number | Input | Output | Protection Degree |
| DOLD Motor Soft starter – MINISTART | GI 9014 | Start (terminal 01) – NO contact: 150 kΩ at AC 300V 5.6 kΩ at DC 24 VStop (terminal 02) – NC contact: 150 kΩ at AC 300V 5.6 kΩ at DC 24V |
Main Contactor (terminals 13,14) – NO contact: 2 A, AC 400 V, AC11 6 A, DC 30 V, resistiveProgrammable Relay (terminals 23,24) – NO contact: 2 A, AC 400 V, AC11 6 A, DC 30 V, resistive |
7.5 ~ 55 kW: IP 20 (IEC/EN 60 529)
75 ~ 110 kW: IP 00 (IEC/EN 60 529) |
- 2-phase softstarter for asynchronous motors up to 110 kW (400V)
- Integrated current control time
- Integrated motor protector
- Integrated bridging contactor
- Volt free control input for softstart/stop
- Connection for motor thermistor
- With two monitoring outputs, one is programmable
- DIN rail mounting with devices up to 30 kW
- Communication interfaces for Profibus, DeviceNet, Modbus and pump controls (optional)
- Start and stop via separate push buttons or control switch
- Motor voltage range 3 AC 200…400V or 3 AC 200…575V
- Softstarter for asynchronous motors up to 110 kW (400 V)
- Integrated current control
- Integrated motor protection
- Integrated bridging contactor
- Voltfree control input for softstart and stop
- Connection for motor thermistor
- 1 Programmable monitoring output
- Units up to 30 kW for DIN rail mounting
- Communication module for Profibus, DeviceNet, Modbus and pump controls (as option)
- Available for common or seperate start-stop buttons.
Power Unit: Width x Height x Depth
7.5/15/18.5/22/30 kW: 98 x 203 x 165 mm
37/45/55 kW: 145 x 215 x 193 mm
75/90/110 kW: 202 x 240 x 214 mm
