CES-A-C5E-01 : Evaluation Unit
Non-contact safety switch CES-A-C5…
| Attribute | Value |
|---|---|
| Degree of protection: | IP65/IP67 |
| Ordernumber: | 77750 |
| Item designation: | CES-A-C5E-01 |
| Gross weight: | 0,35kg |
| Customs tariff number: | 85365019000 |
| ECLASS: | 27-27-24-03 Safety-related transponder switch |
| Rated insulation voltage Ui: | 300 V(Tested by the employersÂ’ liability insurance association up to 75 V.) |
| Rated impulse withstand voltage Uimp: | 1.5 kV |
| Operating voltage DC: | 18 … 24 … 27 V DC regulated, residual ripple<5% |
| EMC protection requirements: | Acc. to EN 60947-5-3 |
| Current consumption: | 80 mA |
| Degree of contamination (external, according to EN 60947-1): | 3 |
| Output Type: | Semiconductor outputs, p-switching, short circuit-proof, electrically decoupled(To ensure safety, both safety outputs (LA and LB) must be evaluated.) |
| Rated Conditional Short-circuit Current: | max. 100 A |
| Connection Type: | M12 plug connector, 8-pin; shield can be connected |
| Ready Delay: | max. 3 s(After the operating voltage is switched on, the semiconductor outputs are switched off and the monitoring outputs are set to LOW level during the ready delay.) |
| Installation Orientation: | any |
| Switching frequency: | max. 1 Hz |
| The following applies to the approval according to UL: | Operation only with UL Class 2 power supply or equivalent measures |
| Secured Switch-off Distance Sar: | max. 58 mm |
| Switching hysteresis: | 1 … 2 mm(applies to surface mounting on aluminum) |
